Make your own free website on Tripod.com
Chemistry infolab reagents and resources
The preparation of ppm volumes by serial dilution

Parts per million conversions

Back to Homepage

Parts per Million calculations


On this page:
ppm conversion values and serial dilutions:
How to dilute and calculate ppm concentrations and volumes,
and how to convert ppm to molarity and percentage amounts.


ppm = parts per million


grams/milliliter = g/ml = milligrams/microliter = mg/ul
1ug /ml = 1mg/l = 1ppm
ppm = ug/g =ug/ml = ng/mg = pg/ug = 10 -6
ppm = mg/litres of water

1 g / 1000ml = 1000 ppm

PPB = Parts per billion = ng/g = ng/ml = pg/mg = 10 -9

Making up 1000 ppm solutions

1. From the pure metal : weigh out accurately 1.000g of metal, dissolve in 1 : 1 conc. nitric or hydrochloric acid, and make up to the mark in 1 liter volume deionised water.

2. From a salt of the metal :
e.g. Make a 1000 ppm standard of Na using the salt NaCl.

FW of salt = 58.44g.
At. wt. of Na = 23
1g Na in relation to FW of salt = 58.44 / 23 = 2.542g.
Hence, weigh out 2.542g NaCl and dissolve in 1 liter volume to make a 1000 ppm Na standard.

3. From an acidic radical of the salt :
e.g. Make a 1000 ppm phosphate standard using the salt KH2PO4

FW of salt = 136.09
FW of radical PO4 = 95
1g PO4 in relation to FW of salt = 136.09 / 95 = 1.432g.
Hence, weigh out 1.432g KH2PO4 and dissolve in 1 liter volume to make a 1000 ppm PO4 standard.
Click this link for Atomic absorption standards


Dilution Formula = M1V1 = M2V2


req ppm x req vol
-------------------------- = no of mls for req vol
         stock

e.g. Make up 50 mls vol of 25 ppm from 100 ppm

25 x 50 / 100 = 12.5 mls. i.e. 12.5 mls of 100 ppm in 50 ml volume will give a 25 ppm solution


Serial dilutions


Making up 10-1 M to 10-5 M solutions from a 1M stock solution.

Pipette 10 ml of the 1M stock into a 100 ml volumetric flask and make up to the mark to give a 10-1 M soln.
Now, pipette 10 ml of this 10-1 M soln. into another 100 ml flask and make up to the mark to give a 10-2 M soln.
Pipette again, 10 ml of this 10-2 M soln. into yet another 100 ml flask and make up to mark to give a 10-3 M soln.
Pipette a 10 ml of this 10-3 M soln. into another 100 ml flask and make up to mark to give a 10-4 M soln.
And from this 10-4 M soln. pipette 10 ml into a 100 ml flask and make up to mark to give a final 10-5 M solution.


Molarity to ppm


e.g. What is the ppm concentration of calcium in 0.01M CaCO3

At. Wt. of Ca = 40 and 1M = 40 x 1000 = 40,000ppm.

Hence, 0.01M soln = 40,000 x 0.01 = 400 ppm.


The FW of an ion species is equal to its concentration in ppm at 10-3M. Fluoride has a FW of 19, hence a 10-3M concentration is equal to 19ppm, 1M is equal to 19,000 ppm and 1ppm is equal to 5.2 x 10-5M.
Go here in Table III for
ISE molarity/ppm conversions


Ppm (parts per million) to % (parts per hundred)


Example:


1 ppm = 1/1,000,000 = 0.000001 = 0.0001%
10 ppm = 10/1,000,000 = 0.00001 = 0.001%
100 ppm = 100/1,000,000 = 0.0001 = 0.01%
200 ppn = 200/1,000,000 = 0.0002 = 0.02%
5000 ppm = 5000/1,000,000 = 0.005 = 0.5%
10,000 ppm = 10000/1,000,000 = 0.01 = 1.0%
20,000 ppm = 20000/1,000,000 = 0.02 = 2.0%


(Parts per hundred) % to ppm


Example:


0.01% = 0.0001
0.0001 x 1,000,000 = 100 ppm


Ppm (parts per million) to % (parts per hundred)


Example:


1 ppm = 1/1,000,000 = 0.000001 = 0.0001%
10 ppm = 10/1,000,000 = 0.00001 = 0.001%
100 ppm = 100/1,000,000 = 0.0001 = 0.01%
200 ppn = 200/1,000,000 = 0.0002 = 0.02%
5000 ppm = 5000/1,000,000 = 0.005 = 0.5%
10,000 ppm = 10000/1,000,000 = 0.01 = 1.0%
20,000 ppm = 20000/1,000,000 = 0.02 = 2.0%


(Parts per hundred) % to ppm


Example:


0.01% = 0.0001
0.0001 x 1,000,000 = 100 ppm





Signature: Dhanlal De Lloyd, Chem. Dept, The University of The West Indies, St. Augustine campus
The Republic of Trinidad and Tobago.
Copyright: delloyd2000© All rights reserved.